For 12 gauge and 12 guage shotguns.

The Strikeforce Side-Folding Shotgun Stock from ATI 's buffer tube is made from DuPont Extreme Temperature Glass Reinforced Polymer. The DuPont Polymer makes the stock scratch and weatherproof in all weather conditions.

The stock side-folds to the left of the receiver and can be fired from the folded position. The TactLite Six-Position Adjustable Stock with TracLOCK System eliminates horizontal and vertical movement of the stock on the buffer tube. It provides smooth secure stock adjustments and eliminates the need for secondary locking mechanisms.

The removable/adjustable cheekrest system has an elongated design to fit all users and includes short cheekrest with 1/2" adjustment.

X1 Recoil Reducing Pistol Grip has sure-grip texture for comfortable gripping, recoil impact is absorbed and it is not affected by chemicals or extreme temperatures.

X2 Recoil Reducing Butt-Pad has been upgraded to 1 1/4" thick. Helps absorb recoil impact and reduces muzzle lift. You can shoot any load size with no pain transfer to the shooter, eliminating the felt punch recoil. The pad is not affected by chemicals or extreme temperatures as well.

Additional Features:

No Snag Points

Dual Sided QD Attachment Point

Removable/Adjustable Cheekrest System

DuPont Extreme Temperature Glass Reinforced Polymer Buffer Tube

X1 Recoil Reducing Pistol Grip

X2 Recoil Reducing Butt-Pad

Scratchproof and Weatherproof

Easy Installation - adapters for all supporting models and mounting hardware are included

Made in the USA

Included:

Parts:

Strikeforce Sub-assembly, cheekrest, side-folding grip assembly, grip adapters (2), knuckle pad, right/left mounts.

Hardware:

Screws - 5/16-24x2", 1/4-28x1 1/2", 5/16-18x1, 14x1 1/4", 6-32x1/4" (4), 6-32x3/4"

(2) M8 Flat Washer

(5) Nut 6-32

Strikeforce TactLite Side Folding Shotgun Stock Instructions:

1. Remove Original Stock

Begin by removing the existing recoil pad from your stock using a Phillips head screwdriver. Next using a long flat head screwdriver or appropriate socket, remove the stock bolt. You can now remove the old stock from the receiver.

2. Folding Knuckle on Grip Assembly

To fold the knuckle on your grip assembly, press the pin cap and under the pivot housing together. Make sure you do not block the pin movement on the bottom of the knuckle.

3. Adapter Installation

Place the appropriate adapter into the pistol grip. Press the adapter into place.

Mossberg does not require an adapter

4. Grip Assembly Installation to Receiver

Place the pistol grip flush against the receiver and using the appropriate bolt and washer, tighten the pistol grip to the receiver with the appropriate allen wrench.

You may need to remove some material from the pistol grip if it impedes the side release lever

5. Buffer Tube to Knuckle Installation

With the knuckle in the folded position, slide the buffer tube into knuckle. Using a phillips head screwdriver and the provided 14x1/4" screw, tighten the tube through the back of the knuckle.

6. Knuckle Pad Installation

Flip your shotgun over and using the provided alcohol wipe, gently wipe the knuckle area. Remove the backing from the knuckled pad and place over the knuckle.

Cheekrest Kit

Parts: cheekrest, right/left mounts

Hardware: 6-3x3/4" and (4) 6-32x1/4" screw, (5) Nut 6-32

Cheekrest Installation Instructions:

1. Hex Nut to Mount Installation

Begin by placing the (5) 6-32 hex nuts into the slots of the cheekrest mounts until properly seated.

2. Cheekrest Mount Installation

Begin by attaching the right side cheekrest mount and snap into the pocket until properly seated.

Turn the stock over and attach the left side cheekrest mount and snap into the pocket until properly seated.

Using the provided 6-32x3/4" screw thread through the left side cheekrest mount and tighten using the appropriate allen wrench.

3. Cheekrest Installation

Take the cheekrest and slide onto the cheekrest mounts making sure the holes on the cheekrest line up with the cheekrest mount holes.

Using the provided 6-32x1/4" screws (2) and the appropriate allen wrench, tighten the left side of the cheekrest. Turn the stock over and repeat the process to tighten the right side of the cheekrest.