Enhanced Self-Leveling Follower – USGI 5.56x45 3-Pack – Yellow

Made in U.S.A.

Material: non-hydroscopic and self-lubricating polymer
Color: Yellow
Platform: AR15, M4, M16

NOTE: Will not fit the latest generation USGI spring that is utilized with the tan or blue (EPM) follower. Also not optimized for thin-walled steel bodied magazines.

The Magpul Enhanced Self-Leveling Follower (ESLF) is a drop-in replacement for the current issue USGI 30 round magazine follower. Enhanced design features a 4-way anti-tilt design for increased feeding reliability.

The Followers are made from non-hydroscopic and self-lubricating polymer.

This item cannot be exported from the United States of America without a valid export permit from the U.S. State Dept. Unfortunately this does include APO addresses due to ITAR restrictions.

Enhanced Self-Leveling Follower (ESLF) Installation

CAUTION: Spring Under Pressure

Use care when performing installation as the magazine spring may eject and cause injury.

Step 1:  Remove Floorplate

Remove floor plate from magazine by gently prying up to disengage the floorplate, then slide the floorplate rearward off the back of the magazine body.

Step 2:  Remove Old Follower

Remove original follower and spring from magazine body, then detach follower from spring.

Step 3:  Attach ESLF

Attach ESLF to original magazine spring by aligning the spring tab to the follower loop and twisting parts together.

Step 4:  Drop ESLF and spring back into magazine body and reinstall floorplate.

Attention: Check magazine function via live fire test prior to tactical deployment.