Czech 98 22 Mauser Scout Mount and 1904 Portuguese - Includes Rings - S&K Scope Mounts
Item #: SKCZ65
$81.95
S&K Mounts CZ65
UPC: none
Weight: 2.00 pounds
Product Description
No drilling, tapping or major alteration. Guaranteed to hold zero. Can be removed and reinstalled easily. Includes 1" fully machined, horizontally split scope rings and is windage adjustable. Requires a long eye relief scope. Made in the USA of top grade military allan
aircraft aluminum.
Installation instructions for the CHECHSLOVAKIAN 98/22 SCOUT
Remove the rear sight from the gun by pushing the hinge pin out & removing the flip up sight & spring. Keeping the special nut supplied with the mount centered in the rear sight, slide it all the way to the rear of the sight. It will slide under a ledge where the spring was.
Installation instructions for the CHECHSLOVAKIAN 98/22 SCOUT
Remove the rear sight from the gun by pushing the hinge pin out & removing the flip up sight & spring. Keeping the special nut supplied with the mount centered in the rear sight, slide it all the way to the rear of the sight. It will slide under a ledge where the spring was.
Center the mount over the rear sight with the two 6-32 screw holes in the side toward the front of the gun. Lower the mount into the rear sight area. Line the 6-32 tapped holes in the mount up with the holes in the side of the receiver. It is very important that these holes line up to keep from damaging the threads when the screws are installed.
Install the two 6-32 x 5/16th flat head screws in these two holes. Snug them down but do not tighten real tight. They don’t need to be very tight! Insert the 10-32 x ¾ flat head screw into the mount & tighten. Insert the 10-32 x ½ set screw into the mount & tighten. Re-tighten the flathead screw.
Related Categories That You May Also Be Interested In:
Mauser Accessories | Mauser Scope Mounts | S&K Scope Mounts | S&K Scope Mounts |
